User guide

Configuration using a Web Browser Chapter 5
30 VideoJet 10
– Enter the user name and the associated password in the appropriate fields.
– Click OK. If the password is correct the respective page is displayed.
Switching to the configuration mode
Depending on whether you are working with a VideoJet 10 sender or receiver
there are various options to configure the unit or to check the current setup.
The sender can only be configured using the Expert Mode.
– Click on the Settings link in the upper section of the Livepage window. The
Expert Mode page will be opened.
– Click one of the links on the left edge of the window. The corresponding
submenu will be opened.
The receiver can be configured with the Expert Mode or the Wizard. The latter
only gives you critical settings for proper operation and can be used for quick
set-up.
– Click on one of the links in the upper section of the Decoder connection
window to switch to the required configuration mode:
– Click the button with the wizard icon on the Wizard page. The first screen of
the Installation Wizard will appear.
– Click one of the links on the left edge of the window of the Expert Mode. The
corresponding subnemu will be opened.
All settings are stored in the VideoJet 10 memory, and they are preserved even
if the power is interrupted.