User guide

Configuration using a Web Browser Chapter 5
28 VideoJet 10
– Insert the CD into the CD-ROM drive of the computer. The CD should start
automatically. If the CD does not start automatically, open the root directory of
the CD in Windows Explorer and double click MPEGAx.exe.
– Follow the instructions on the screen.
Establishing the connection
The VideoJet 10 must be assigned a valid IP address for your network, before it
can be operated in your network environment.
The following default address has been pre-set at the factory:
Sender: 192.168.0.1
Receiver: 192.168.0.2
– Start the Web browser.
– Enter the IP address of the VideoJet 10 as the URL. The VideoJet 10 home
page will be shown in the browser.
If the unit is a sender, the home page will be the Livepage (which shows the live
video image).