User guide

Chapter 4 Installation
VideoJet 10 23
Switching on/off
Power connection
A power supply unit is included with the VideoJet 10 package. The VideoJet 10
does not have a mains switch. The unit is ready for operation as soon as it is
connected to the mains supply.
Warning!
Use only the plug-in mains adapter provided for operation of the
VideoJet 10. Where necessary, take appropriate measures to ensure that
the mains supply is protected against voltage surges, spikes or brownouts.
Warning!
Do not connect the VideoJet 10 to the power source until all the other
connections have been made.
– Connect the mains socket into the connector Power.
– Plug the mains adapter into a fused power socket. The unit is ready for
operation as soon as the LED Power stops blinking red during start-up and
becomes green.
If the network connection is in order, the green LED L is also lit. The blinking
yellow LED T indicates data traffic on the network.