User guide

Chapter 3 Product Description
VideoJet 10 17
VideoJet 10 back panel connections
7 CompactFlash interface
drive for CompactFlash cards and MicroDrives or
for wireless network connection using a wireless LAN card
8 Screw clamp ALARM I/O
for connection of alarm sensors or switches and for switching of external
devices (e.g. lamps)
9 RJ45 Ethernet connector
for connecting to the network
10 Socket Power
mains cable connector
11 Reset button for return to the default settings
12 LED I
lights up red with active alarm
13 LED O
lights up green when the relay is switched
14 LED L
lights up green when the device is connected to the network
15 LED T
flashes yellow when data packages are transmitted
Note
You can find further information on the LEDs on page 135.