User guide

Chapter 13 Appendix
VideoJet 10 135
LEDs
The VideoJet 10 video server is equipped with several LEDs that show the
operating status and can give indications of possible malfunctions:
LED Power
Not lit: Device is switched off.
Lit green: Device is switched on.
Blinking green: The device is accessed.
Lit red (briefly): Device is starting up.
Lit red (continuously): Device is out of order; upload failed.
LED I
Lit red: Alarm is triggered.
Not lit: Alarm input is inactive.
LED O
Lit green: Relay is switched.
Not lit: Relay is inactive (idle state).
LED L
Lit green: Connected to the network.
Not lit: Not connected to the network.
LED T
Blinking yellow: Data transfer via the network.
Not lit: No data transfer.