User guide

Receiver Operation Chapter 9
124 VideoJet 10
– Mark the checkbox Include audio if you want to transmit audio, too. Make
sure for correct audio transmission configuration for both, sender and receiver.
– Mark the checkbox Include data if you want to transmit transparent data, too.
Make sure for correct data transmission configuration for both, sender and
receiver.
Note
The checkboxes must be marked prior to connection set-up in order to
include audio and data transmission.
– Click the corresponding checkbox again to deactivate audio or data
transmission respectively.
– Click the button Connect MPEG-4 to connect the video images to the
connected monitor. Under Monitor a snapshot from the connected source is
displayed.
– If the sender is a multi-channel unit, e.g. a VideoJet 8000 from VCS, you can
choose the Video input to be displayed.
Terminating a connection
– Click the close button (X) in the ’Monitor’-window title bar to stop the video
display on the monitor.