User guide

Chapter 9 Receiver Operation
VideoJet 10 123
Protected VideoJet 10
If the VideoJet 10 is password-protected against unauthorized access, a
corresponding message and a prompt to enter the password will appear first.
Note
A VideoJet 10 provides various authorisation levels to limit the scope of a
user's access (see page 36 for the sender and page 86 for the receiver).
– Enter the user name and the associated password in the appropriate fields.
– Click OK. If the password is correct the respective page is displayed.
Preview
In this area you can select one of the video sources found in the network. A
snapshot of the video image from the selected video source is displayed. In
addition to the unit name the snapshot provides other means of identifying the
sender.
Monitor
As soon as a connection with a sender is established, you will see a snapshot of
the video image from the connected sender here.
Connection between the receiver and sender
During startup the VideoJet 10 automatically scans the network for available
senders. As soon as a sender is found on the network, the VideoJet 10
automatically displays a snapshot of this sender. All the senders found are listed
in a dropdown list labeled Video sources.
Establishing a connection
– Choose a sender from the list of Video sources. A JPEG snapshot from the
video source selected will appear on the start page under Preview.
Note
If the connection is not established, the maximum number of possible
connections may already have been reached. The maximum number of
connections depends on the unit and network configuration.