User guide

Receiver Operation Chapter 9
122 VideoJet 10
– Follow the instructions on the screen.
Establishing the connection
The VideoJet 10 must be provided with a valid IP address to operate on your
network.
The following default address has been pre-set at the factory: 192.168.0.2
– Start the Web browser.
– Enter the IP address of the VideoJet 10 as the URL. The connection will be
established, and after a short time the Decoder connection page will appear.
The Decoder connection page
After the connection has been established, the Decoder connection page will be
displayed and the unit automatically scans the network for available senders.