User guide

Chapter 8 Sender Operation
VideoJet 10 119
– Start playback of the sequence you want to back up as a whole or in parts.
– Click the icon for backing up a sequence. Saving begins immediately and is
indicated by the slow flashing of the icon on the button.
– Click the icon for sequence backup again to stop saving.
This procedure can be repeated within a sequence to back up several segments
of a longer sequence.
– Click the button for backing up a snapshot to save only snapshots from the
sequence being played to your hard drive.
The snapshots will be shown immediately in the area to the right of the button.
The location for saving sequences and snapshots can be specified in the
VideoJet 10 configuration (see page 81).
Installing MPEG-Viewer
You can play back saved video sequences using the MPEG-Viewer from VCS,
which can be found on the software CD supplied (see the list of Components
supplied on page 11).
Note
In order to be able to play back recorded video images with the MPEG-
Viewer, an appropriate MPEG-ActiveX must be installed on the computer.
For further information see page 107.
– Insert the CD into the CD-ROM drive of the computer. If the CD does not start
automatically, open the CD in the Windows Explorer.
– Open the MPEG-Viewer directory and copy the file MPEGViewer.exe to your
computer's hard drive.
– If necessary, you can also start the MPEG-Viewer by double-clicking the file
MPEGViewer.exe.