User guide

Chapter 8 Sender Operation
VideoJet 10 117
– Select the partition of which you want to view the recordings out of the
dropdown list Partition name.
– Click a list entry. Playback of the selected sequence will begin immediately in
the video window.
Playback control
A time bar is shown below the video image to indicate the progress of the
sequence. When you switch to the Media-Replay page, the blue bar initially
shows the current day, week and year and a time scale with two hour intervals.
If a particular sequence is selected for playback by clicking, the time range to
which it belongs is shown in the bar, with the selected sequence indicated in blue
with a green border. The yellow slider indicates the position of the image currently
shown in the sequence.
The time bar offers various navigation options within and between the
sequences.
– Change the time section displayed by clicking the arrow buttons or by dragging
the blue area to the left or right using the mouse.
– Change the time intervals displayed by clicking the zoom buttons (magnifying
glass icons). Intervals of three days, one day, two hours, five minutes or one
minute can be chosen.
– Select another sequence for playback by clicking the corresponding blue
marking. The sequence will be highlighted with a green border to indicate that
it is the active sequence.
If necessary, drag the yellow bar to the time position at which playback is to start.
Detailed information on the date and time is shown below the bar.
The buttons below the video image can be used to control playback. The buttons
have the following functions:
Skip to the beginning of the active video sequence,
Skip to the previous alarm