User guide

Sender Operation Chapter 8
114 VideoJet 10
Recording video sequences
Segments from the current video sequence on the Livepage can be saved on the
computer hard drive.
– Click the MPEG-sequence icon. Saving begins immediately. The storage
location depends on the configuration of the VideoJet 10 (see page 81). A
recording in progress is indicated by the blinking of the red dot on the icon.
– Click the MPEG-sequence icon again. Saving will be terminated.
Image resolution
The sequences will be recorded at the resolution specified in the encoder settings
(see page 41). Select the stream for Livepage video display on the configuration
page Livepage configuration (see page 79).
MPEG-Viewer installation
You can display recorded video sequences with the VCS MPEG-Viewer which
you find on the accompanying software CD (see page 11).
Note
In order to be able to play back recorded video images with the MPEG-
Viewer, an appropriate MPEG-ActiveX must be installed on the computer.
For further information see page 107.
– Insert the CD into the CD-ROM drive of the computer. If the CD does not start
automatically, open the root directory of the CD in Windows Explorer.
– Open the directory entitled MPEG-Viewer and copy the MPEGViewer.exe file
to your hard drive.
– You can start the MPEG-Viewer by double-clicking the file
MPEGViewer.exe.