User guide

Sender Operation Chapter 8
110 VideoJet 10
Alarm input
In the event of an alarm, a red alarm symbol for the triggering alarm input is
displayed next to the video image. The display of alarms and other details
depends on the configuration of the unit (see page 58).
Relay output
Depending upon configuration, a device such as a floodlight or a door opener can
be activated by the relay of the VideoJet 10 unit. The display of the relay and
other details depends on the configuration of the unit (see page 64).
– Click the relay symbol next to the video image to activate the relay output. The
symbol will turn red when the relay is activated.
Event log
The Event log field is where events such as switching a relay or alarm status
messages are listed. These messages can be saved automatically in a log file
(see page 80).
System log
The System log field contains information about the operating status of the
VideoJet 10 and the connection. These messages can be saved automatically in
a log file (see page 80).
Audio function
Depending upon configuration (see page 45) audio data can be send and
received by the VideoJet 10. All users that are connected via Web browser
receive the audio data sent by the VideoJet 10.
Only the user who has set up the first browser connection can send audio data to
the unit.
– Klick on the Livepage anywhere outside the video picture to take the focus off
the ActiveX.
– Keep the key F12 pressed to send audio data to the VideoJet 10. In the
browser status bar the message Send Audio ON is shown.
– Release the key F12 if you want to stop sending audio data to the VideoJet 10.
In the browser status bar the message Send Audio OFF is shown.