User guide

Chapter 8 Sender Operation
VideoJet 10 109
The Livepage
After the connection is established, the Livepage will be displayed first. It shows
the live video image in the middle of the browser window. Depending upon
configuration, various text overlays may be visible on the image (see page 39).
Other information may also be shown next to the video image on the Livepage.
The display depends on the settings on the configuration page Livepage
configuration (see page 78).
Note
If the connection is not established, the maximum number of possible
connections may already have been reached. The maximum number of
connections depends on the unit and network configuration.
Protected VideoJet 10
If the VideoJet 10 is password-protected against unauthorized access, a
corresponding message and a prompt to enter the password will appear first.
Note
A VideoJet 10 provides various authorisation levels to limit the scope of a
user's access (see page 36 for the sender and page 86 for the receiver).
– Enter the user name and the associated password in the appropriate fields.
– Click OK. If the password is correct the respective page is displayed.
Image quality
The VideoJet 10 displays either a live video sequence in MPEG-4 format or
individual live video frames in JPEG format.
– Click on the MPEG-4 link in the navigation bar at the top of the browser display
to display or decode the video sequences in the corresponding image format.
or
– Click on the M-JPEG link in the navigation bar at the top of the browser display
to display or decode the individual frames in the corresponding image format.
– Click one of the links (Small or Large) above the live video image to view the
image in the respective resolution.