User guide

Safety Information Chapter 2
10 VideoJet 10
Installation and operation
] Relevant electrical codes and guidelines must be complied with at all times
during installation.
] Adequate knowledge of network technology is necessary for the installation.
] Before installing or operating the unit, make sure you have read and
understood the documentation for the other equipment connected to the
system, such as cameras. There you will find important safety instructions and
information about authorised use.
] Perform only the installation tasks and operating steps described in this
manual. Additional actions may lead to personal injuries, property damage or
damage to the equipment.
Maintenance and repair
] Never open the casing of the VideoJet 10. The unit does not contain parts that
you can repair or replace.
] Never open the housing of the power supply unit. The power supply unit does
not contain parts that you can repair or replace.
] Ensure that all maintenance or repair work is performed exclusively by
personnel qualified in electro-technics and network technology.