User guide

Configuration using a Web Browser Chapter 5
46 VideoJet 8000
Video receiver IP address:
For each number, enter the corresponding IP address of the desired receiver.
Remote receiver password:
If necessary, enter the password, if the remote location is protected by a
password.
Live video auto-connect:
Select the option On if an active connection should be automatically
reestablished to one of the previously specified IP addresses after each restart,
e.g. after a connection breakdown or network dropout.
Select camera on alarm:
Here you can select the camera whose image will automatically be displayed first
to the receiver after the alarm connection has been established. Depending on
the system configuration, the receiver can then also select the other cameras.