User guide

Configuration using a Web Browser Chapter 5

36 VideoJet 8000

Camera configuration

Note

Each camera input must be configured separately. To do this, click the

camera icons one after another. The configuration page is identical for all

the inputs.

Camera name:

Enter the desired camera name here. The camera name makes it easier to

identify the remote camera location, in the event of an alarm for example. The

camera name will also be shown on the video image if so specified in the

configuration (see page 76). It is also used by VIDOS, the VCS software for

administering video monitoring systems. The camera name helps to identify the

camera or its location in the program. Enter an unambiguous, understandable

name in the field.

Video loss alarm:

Select On to monitor the video source (camera). If the signal is not present, the

VideoJet 8000 triggers an alarm.