User guide

VideoJet 8000 17
Installation 4
The VideoJet 8000 is designed for tabletop operation and installation in control
cabinets. The supplied mounting kit makes installation in a 19" rack fast and easy.
Four self-adhesive, anti-slip rubber feet are included with delivery. These can be
attached to the bottom of the unit.
Warning!
The unit is intended for indoor use only. Choose a suitable location for
installation where the equipment will not be subject to extremes of
temperature or humidity. The ambient temperature must be between 0 and
+50 °C. The relative humidity should not exceed 80% (no condensation).
The unit generates heat during operation. Ensure that there is adequate
ventilation and also that there is enough clearance between the unit and
heat-sensitive objects or equipment.
Please ensure the following conditions for installation:
] Do not mount the unit close to heaters or other heat sources. Avoid locations
in direct sunlight.
] Allow sufficient space for running cables.
] Ensure that the unit has adequate ventilation. For cabinet installation of
multiple units, pay particular attention to the overall thermal load.
] Use only the cables supplied for connection, or appropriate cables resistant to
electromagnetic interference.
] Position and run all cables so that they are protected from damage, and
provide strain relief where needed.