Setup guide

Chapter 3 MeetingPoint Setup
VCON Desktop Systems Installation and Setup Guide 37
9. The Pan/ Tilt /Zoom Camera dialog box is applicable if you connected a
Pan/Tilt/Zoom-type (PTZ) camera to the computer. If you do not use a
PTZ camera, you can select None as the PTZ camera type in the dialog
box’s top list and continue the MeetingPoint setup.
Pan/Tilt/Zoom Camera Configuration Dialog Box
Enter information as follows:
Camera
Selection
In the Select your Pan/Tilt/Zoom camera type
list, select the manufacturer and/or model of the
PTZ camera. If you do not use a PTZ camera, keep
the default value None.
In the Select the communication port it is
connected to list, select the name of the computer
port to which the camera is connected. The
available options are COM1, COM2, COM3 and
COM4.