Setup guide

Chapter 3 MeetingPoint Setup
VCON Desktop Systems Installation and Setup Guide 35
Click Next to continue.
— If this version does not support MXM, the Online Directories dialog
box appears.
— Otherwise, the Pan/ Tilt/Zoom Camera appears. Proceed directly to
step 9.
If you leave this box blank, the computer cannot
register with a gatekeeper.
CAUTION If you want to register a stand-alone
system in an MXM, you must
uninstall MeetingPoint and then
define this request during the new
MeetingPoint installation. Do not
type the address of the MXM in this
space.
Allow Adaptive
Bandwidth
Adjustment
Select this option to enable reduction of the alloted
bandwidth if the network is congested.
Enable Lip
Synchronization
Mechanization
Select this option to enable adjustment of the video
and the audio if they are out of sync with each other
(see the MeetingPoint 4.6 User Guide, Appendix B,
“Monitoring the Conference State”).
Automatic
Buffering
Control
T Select this option to enable the system to
automatically control the amount of buffering
required to maintain the consistency of the
video and audio transmission. For example, if
video packets are delayed for 1 or 2 seconds,
the system will automatically synchronize the
transmission so that the delay does not disturb
the visible video.
T Deselect this option only if the automatic
buffering is not sufficient — for example, if
the quality of the video meeting is poor or
there is a noticeable delay.