Setup guide

Chapter 3 MeetingPoint Setup
VCON Desktop Systems Installation and Setup Guide 25
3.3 Starting and Exiting MeetingPoint
®
MeetingPoint’s Start procedure varies, depending on whether or not your system
will be in a videoconferencing network managed by a VCON Media Xchange
Manager™ (MXM).
System Managed by MXM
³ To start MeetingPoint
1. In the Windows Desktop, click the VCON MeetingPoint icon.
The Login dialog box appears.
Initial Login to MXM
2. Enter MXM login information as follows (consult with your system
administrator):
3. Click Connect to complete the login process.
— If the MXM automatically registers your computer, the MeetingPoint
application opens.
— If a message appears stating that the MeetingPoint startup cannot
proceed until login is granted, contact your system administrator.
After login is granted, click Connect to continue.
MXM Login
Name
The name of your computer as listed in the MXM
database and the MXM Administrator.
Password/
Verify Password
Password required to log in. The first time you register,
you must type it twice for verification. If you do not
supply this password, the login request is rejected.
Gatekeeper The IP address of the MXM. If you do not know it, ask
your system administrator.