User's Manual

9. Laser Measurement Indicator
▣ Laser LCD Display
▶ LCD Brightness
Short-press and together to adjust brightness in 1 to 6 steps.
You can check brightness level on the numerical laser LCD display.
▶ Change Unit of Measurement
Long-press to change unit of measurement between M (meter) and Y (yard).
▶ Basic Functions
1. Power On
Press to activate laser and GPS functions.
2. Mode Selection
After turning the power on, press the button to toggle in the following sequence: Normal Mode,
Pin Mode and Tournament Mode.
3. Unit Conversion
When the button is pressed for more than 3 seconds, the unit will toggle between meters (M)
and yards (Y).
4. Focus Adjustment
Rotate the focus adjustment of the eyepiece to the left and right to adjust focus.