Instruction manual

76 © 2008 VBrick Systems, Inc.
Configuration: Passthrough > COM2
Passthrough settings for COM2 are a subset of COM1. See Configuration: Passthrough >
COM1 for complete details.
Configuration: System
Configuration: System > General
System
This menu lets you set system-related parameters.
Network Time
Synchronization
Enabled or Disabled. If enabled, the
System Date Time field
is inactive. See Network Time Synchronization
on page 20 to
set host name or IP address of time server. You must set these
parameters before you can enable Network Time Synchronization on
this window.
System Date Time Set system date and time in mm/dd/yyyy hh:mm format.