User guide

Using the STB Remote

This wireless remote control device is used with the Set Top Box (also called the Digital IP

Receiver). The remote control unit is an infrared remote control device you point at the

sensor on the front of the STB above the LEDs. As described below, the buttons on the remote

control only work if the STB is configured for

MCS or Local mode. If configured for Local-

Fullscreen

, you can only use the Volume and Mute buttons. See Start Mode on page 10 for

more information. The buttons on the handheld IR remote control are described in the

following table from left to right and top to bottom.

Note If playing a file on an NXG VOD server in Local mode, the

Play button on the IR

remote will start (or re-start) the video from the beginning. For best results, use the

Channel and Select buttons rather than the mouse controls.