User guide

Using the Scheduler
ETV Portal Server User Guide 45
Record by Manual Entry
When the Record Source is Manual Entry, you can only Record To an NVR.
T To use Manual Entry as the record source
1. Select a live stream from the list of
Program Names.
2. Go to
Advanced Settings and select Manual Entry.
3. Select and define
MPEG-1, MPEG-2, MPEG-4, WM, or H.264 as the record source and click
Next.
MPEG-1 Enter a Program Name, or IP Address and Port number.
MPEG-2 Enter a Program Name, or IP Address and Port number.
MPEG-4 Enter a Program Name or URL. If URL, use
VBHTTP or RTSP in
following format:
vbhttp://MPEG4Unit1/vbs1d1.sdp
rtsp://172.2.3.4/vbrickvideo1
WM Enter a Program Name or URL.
H.264 Enter a Program Name or URL.