User guide

8EtherneTV Media Distribution System
Saving Changes
Once logged in you can navigate and change Configuration parameters as necessary. Each of
the configuration screens has the same options at the top. When done, click
Apply to save any
changes you have made. Do not click
Apply after each change. Note that file system writes,
such as those that result from changing the configuration or modifying the local user
interface, may take several seconds. Avoid rebooting the STB immediately after such writes to
avoid corruption of the file system and possible loss of data.
Logout Exits the configuration application.
System Information Provides system-level information including version number,
networking configuration, and memory usage. Note that the version
number is shown in the upper-right corner of each window.
System Time Use to set system time. The STB should be manually rebooted
whenever you change the system time. If the system time is changed
without a reboot, the video may freeze. The automatic reboot
feature may reboot at the wrong time if the system time is changed
without a reboot.
System Update Use to update the software. See System Upgrade
on page 27.
Configuration Use to set all configuration parameters described in this document.
Log out Logs out the current user. You can log back in as a different user if
necessary.
Apply Saves any configuration changes.
Refresh Refreshes the window with the last saved information.
Exit Returns the Administration page from anywhere in the application.