User manual

Adding Storage to 1950/2950 Servers
VOD-W Admin Guide 73
c. Use Tab or Arrow Up/Down key to highlight on Raid Level and Enter to select
RAID-5 then Enter.
d. To select the drives use the Tab to
Physical Disks then Space to select drive ID
01:00–01:04 for 5 drives (300 GBs each). The approximate size is about 1142272
MB. (First 1.5 TB)
e. Use the Tab or Up/Down key to select
OK then hit Enter.
f. Hit OK
g. Hit F2 on
Virtual Disk 0 and select Initialization > Fast Init then enter and OK.
h. If there are 5 disks in the enclosure being configured skip to step v.
i. Use Tab or Arrow Up/Down key to highlight on
Raid Level and Enter to select
RAID-5 then
Enter.
j. To select the drives use the Tab to
Physical Disks then Space to select drive ID
01:05–01:09 for 5 drives (300 GB each). The approximate size is about 1142272 MB.
(Second 1.5 TB)
k. Use the Tab or Up/Down key to select
OK then hit Enter.
l. Hit
OK.
m. Use Tab or Arrow Up/Down key to highlight
Virtual Disk 1.
n. Hit F2 on
Virtual Disk 1 and select Initialization > Fast Init then enter on OK.
o. If there are 10 disks in the enclosure then skip to step v.
p. Use Tab or Arrow Up/Down key to highlight
Raid Level and Enter to select RAID-5
then
Enter.
q. To select the drives use the Tab to
Physical Disks then Space to select drive ID
01:10–01:14 for 5 drives (300 GB each). The approximate size is about 1142272 MB.
(Third 1.5 TB)
r. Use the Tab or Up/Down key to select
OK then hit Enter.
s. Hit
OK.
t. Use Tab or Arrow Up/Down key to highlight on
Virtual Disk 2.
u. Hit F2 on
Virtual Disk 2 and select Initialization > Fast Init then enter on OK.
v. Hi t
Esc to exit.
w. Hi t
OK.
x. Simultaneously hit
Ctrl-Alt-Del key to reboot the server.
18. Repeat step 17 for each additional enclosure. The drive IDs will be different in the
second enclosure and in the third enclosure in the system.
19. After the system reboots, logon as
Administrator.
20. Go to
Start > Administrator Tools > Computer Management.