Specifications

Security Systems
Grasbrunn
05-February-2015
Page 24 of 38
 Firmware CPP-ENC 5.52.15 (for VIP X1600 XFM4)
 Firmware CPP-ENC 5.60.61 (for VJT XF family)
 Firmware X1/X2: 2.53.05
 Combined Firmware 5.80.0625 (CPP3, CPP4, CPP-ENC)
 VRM: 3.00.48
 VSG 5.60.55
 BRS: 8.10/8.11
 BIS: 3.0
 iOS: 6.1.2
 Allegiant MCS: 2.92.0.1
 Intuikey Keyboard: 1.96
 VMWare: 5.1.0
 DVR 2.1 / 3.60
o Broadcom NetXtreme Gigabit Driver for Microsoft Windows 7 (64-bit) 14.2.0.5 Rev. A
06.06.2012
o NVIDIA Quadro Professional Driver for Microsoft Windows Vista and Microsoft Windows
7 64-Bit Operating Systems 307.74 Rev.A 30.Jan 2013
o ATI FireGL Unified Graphics Driver (Microsoft Windows Vista 64-bit and Microsoft Win-
dows 7 64-bit) 8.982.3 Rev.A
o The supported Allegiant Master Control Software is 2.92.0.1
o Bosch VMS integrates with BIS version 3.0
o Bosch VMS 4.5.5 will be the last BVMS version supporting
 Windows XP (allowed for <500 channels only) for Operator Clients
 The Vidos NVR and BVMS NVR
• When activating a license on Windows 7 or Windows Server 2008, make sure that the network
adapters required for operation are active. When unplugging a network cable, these Operating
Systems deactivate the corresponding network adapter.
• When upgrading a Management Server, stop the Central Server service before starting setup.
• Upgrade is not working if Configuration Client is left open - close Configuration Client before
upgrade.
Resolved issues in version 4.5.5
Mobile Video Service (MVS)
• Fixed: Web Client/iOS Client displayed 4CIF MPEG4 camera images duplicated.
• Fixed: iOS Client showed wrong recording stream in playback.
Operator Client
• Fixed: Prepositions on VSG attached ONVIF cameras were not possible in case of an alarm.
Configuration Client / Configuration Wizard / Management Server
• Fixed: Wizard: When changing network settings to use DHCP address, the IP address shown on
"Video Settings" remained unchanged.
Known Issues in version 4.5.5
Bosch VMS 4.5.5 has been developed in parallel to Bosch VMS 5.0 for the purpose of delivering the
requested features to the market quickly. Hence, the listed known issues of Bosch VMS 4.5 (see below)
are not addressed in this Release to avoid double effort (same bugs being fixed in Bosch VMS 4.5.5 and