Specifications

Security Systems
Grasbrunn
05-February-2015
Page 18 of 38
• No replay support
Bosch VMS-BIS connection
• The instructions on how BIS and Bosch VMS are connected have changed –Please check the
updated Installation Manual.
Miscellaneous
• Root certificate used for Bosch VMS can be deleted automatically. To avoid this, ensure that the
group policy of the computer is not configured to automatically update its root certificate.
• Debounce time for Virtual Input Data has been set to 0 to prevent loosing events when used with
additional data.
Please set the debounce time to 0 when upgrading from an earlier version and using additional
data.
• ASF exports are not possible for resolutions higher than HD (1920x1080).
• Bosch VMS does not support B-frames. This may slightly reduce the image quality in the
recording. If needed, please increase the bit rate in the profile settings in encoder to get the
quality configured in the profile.
• Allegiant CCL Emulation applies to IP cameras only. The "MON+CAM" commands refer to the
logical numbers in Bosch VMS, not the numbers used by the Allegiant Matrix.