5 Security Systems Grasbrunn Release Notes 05-February-2015 Bosch Video Management System Version 5.5 Introduction The latest version of the Release Notes is always available on the Bosch Product Catalog (www.boschsecurity.com). Version 5.5 introduces new features and resolved issues to your Bosch Video Management System. In the following paragraphs, you will find: • New features in version 5.5 • Installation Notes • Resolved issues in 5.5 • Known issues in 5.5 New features in version 5.
Security Systems Grasbrunn • Compatibility o Tested with the following software/firmware versions (exact numbers subject to change): VideoSDK: 5.82.68 Firmware MPEG-4: 4.15.0002 Firmware CPP3: 5.73.0040 Firmware CPP4: 5.93.0025 Firmware CPP5: 5.92.0015 Firmware CPP6 6.00.0079 Firmware CPP-ENC 5.52.0015 (for VIP X1600 XFM4) Firmware CPP-ENC 5.93.0015 (for VJT XF E family, VIDEOJET decoder 3000) Firmware X1/X2: 2.53.05 Combined Firmware (was not available for this release) VIP XD HD 1.08.07 VJD 7000 54.08.
Security Systems Grasbrunn 05-February-2015 ATI FireGL Unified Graphics Driver (Microsoft Windows Vista 64-bit and Microsoft Windows 7 64-bit) 9.003.3.4 Rev. A (3 Jan 2014) When activating a license of the Operating System, make sure that the network adapters required for operation are active. When unplugging a network cable, these Operating Systems deactivate the corresponding network adapter. When upgrading a Management Server, stop the Central Server service before starting setup.
Security Systems Grasbrunn • FIXED: CW: When configuring portmapping for two MVS, the initial view is not correct (public ports). 05-February-2015 Mobile Video Service/Web Client • FIXED: MVS transcoder service crashed under rare circumstances. • FIXED: Usability: IIS default logging settings could fill up C drive after a while. • FIXED: Zooming in a 4/3 cameo of a 16/9 stream did not work correctly in case of SW transcoding.
Security Systems Grasbrunn • Maximum number of panels connected to BVMS is 20. Total event load of all panels must not exceed 100 events/minute. 05-February-2015 ONVIF • The Online Help does not describe how to retrieve the ONVIF events of a given camera type to configure ONVIF event mapping as this is different for every model.To set up ONVIF event mapping please adjust the ONVIF section in the BVMS log config file (%programfiles(x86)%/Bosch\VMS\AppData\Server\CentralServer\BVMSLogCfg.
Security Systems Grasbrunn • Operator Client can crash when camera sequences are running and the computer is locked, for example by pressing “Windows-key + L”. Please avoid locking the computer when running sequences. 05-February-2015 CameoSDK, Client scripts • Most client scripts are not supported when Operator Client is connected to a Management Server with a previous version.When a user with restricted rights to access all cameras, executes a client script (via Logical Tree) that calls CameraManager.
Security Systems Grasbrunn 05-February-2015 Miscellaneous • If the number of entries in the Alarm List becomes too large (>1000), Operator Client runs possibly very slow. • Permissions for sequences are ignored for sequences placed on maps • The user can access a sequence for which the permission was removed. This happens when the sequence has been saved as Favorite earlier. • If you configure both a local and an Enterprise user group each with LDAP, only the local LDAP user group can be used.
Security Systems Grasbrunn Bosch Video Management System Version 5.0.5 05-February-2015 Introduction The latest version of the Release Notes is always available on the Bosch Product Catalog (www.boschsecurity.com). Version 5.0.5 software introduces feature enhancements and resolved issues to your Bosch Video Management System. In the following paragraphs, you will find: • Feature enhancements in version 5.0.5 • Installation Notes • Resolved issues in version 5.0.5 Feature enhancements in version 5.0.
Security Systems Grasbrunn • • • • 05-February-2015 Compatibility o Tested with the following software/firmware versions: VideoSDK: 5.80.0132 Firmware MPEG-4: 4.15.0002 Firmware CPP3: 5.73.0040 Firmware CPP4: 5.92.0090 Firmware CPP5: 5.90.0070 Firmware CPP6 5.91.0085 Firmware CPP-ENC 5.52.0015 (for VIP X1600 XFM4) Firmware CPP-ENC 5.92.0021 (for VJT XF E family) (Beta) Firmware X1/X2: 2.53.05 Combined Firmware (was not available for this release) VIP XD HD 1.08.07 VJD 7000 54.
Security Systems Grasbrunn Resolved issues in version 5.0.5 05-February-2015 Cameo SDK • FIXED: If IMediaPlayer.Play() is called shortly after setting IMediaPlayer.CurrentPosition, it could happen that playback or video search start at a wrong time. Known issues in version 5.0.5 Devices • VIP X16 XF E only allows 15 IPS (NTFS) / 12.5 IPS (PAL) on the 2nd stream. Profile is set to 30 IPS / 25 IPS. This leads to a configuration mismatch message.
Security Systems Grasbrunn Bosch Video Management System 5.0 05-February-2015 Introduction The latest version of the Release Notes is always available on the Bosch Product Catalog (www.boschsecurity.com). Version 5.0 software introduces new features and bugfixes to your Bosch Video Management System. In the following paragraphs, you will find: • New features in version 5.0 • Installation Notes • Resolved issues in 5.0 • Known issues in 5.0 New features in version 5.
Security Systems Grasbrunn • • Automatic setup of IIS (Mobile Video Service) On hold/not released: Search for additional data 05-February-2015 s. above • Trigger relays • Trigger export at Management Server • Support of PTZ • Web-Client UI available in several new languages Mobile App • New: Record video using the IOS mobile camera.
Security Systems Grasbrunn • • • • 05-February-2015 Compatibility o Tested with the following software/firmware versions: VideoSDK: 5.80.0127 Firmware MPEG-4: 4.15.0002 Firmware CPP3: 5.73.0040 Firmware CPP4: 5.92.0090 Firmware CPP5: 5.90.0070 Firmware CPP6 5.91.0085 Firmware CPP-ENC 5.52.0015 (for VIP X1600 XFM4) Firmware CPP-ENC 5.92.0021 (for VJT XF E family) (Beta) Firmware X1/X2: 2.53.05 Combined Firmware (was not available for this release) VIP XD HD 1.08.07 VJD 7000 54.08.
Security Systems Grasbrunn • • • • • • • • • • • • • • • • • • • • 05-February-2015 FIXED: Pre-Positions on VSG attached ONVIF cameras were not possible in case of an alarm (server-side doming). FIXED: Scan Wizard could crash when assigning encoders. FIXED: The user could add unsupported encoder types to the VRM. FIXED: Digital monitor wall now supports ONVIF cameras via VSG. FIXED: Dome prepositions were not properly saved for Axis ONVIF dome.
Security Systems Grasbrunn • FIXED: Operator Client sometimes showed "no time" and rewound incorrectly when an alarm (generated by a compound event) was accepted. Timeline was set to "current time" instead of "alarm time". 05-February-2015 Known issues in version 5.0 Migration • Please delete your elements.bvms file when updating from a previous Beta version of Bosch VMS 5.0. • Old elements.bvms (< 3.0.0) cannot be migrated if .NET 3.5 is not installed.
Security Systems Grasbrunn 05-February-2015 10 * VI data field with length 30 = 300 characters: 500 items/sec (average) o Item = data Input Event. • Known restrictions for additional data written into recordings: Bosch VMS can only process up to 3200 Bytes (corresponds to about 3200 English characters in Unicode) per event. If the operator wants to search for additional data and access video from the results (search being performed in Logbook), then the later restriction applies.
Security Systems Grasbrunn 05-February-2015 Operator Client now supports a “Multi-view” feature when watching live. This is particularly useful for displaying a 4K camera in multiple Image panes. The operator can then adapt the image section in each Image pane by using focus and zoom. The CPU load of Operator Client does not increase in this case. The reason is that the camera image is decoded only once, the image sections in the Image panes are not decoded again.
Security Systems Grasbrunn 05-February-2015 • No replay support Bosch VMS-BIS connection • The instructions on how BIS and Bosch VMS are connected have changed –Please check the updated Installation Manual. Miscellaneous • Root certificate used for Bosch VMS can be deleted automatically. To avoid this, ensure that the group policy of the computer is not configured to automatically update its root certificate.
Security Systems Grasbrunn Bosch Video Management System Version 4.5.9 05-February-2015 Introduction Version 4.5.9 software introduces new features and bug-fixes to your Bosch Video Management System. In the following paragraphs, you will find: • New features in version 4.5.9 • Installation Notes • Resolved issues in 4.5.9 New features in version 4.5.
Security Systems Grasbrunn • • • 05-February-2015 DVR 2.1 / 3.60 o Broadcom NetXtreme Gigabit Driver for Microsoft Windows 7 (64bit) 14.2.0.5 Rev. A 06.06.2012 o NVIDIA Quadro Professional Driver for Microsoft Windows Vista and Microsoft Windows 7 64-Bit Operating Systems 307.74 Rev.A 30.Jan 2013 o ATI FireGL Unified Graphics Driver (Microsoft Windows Vista 64-bit and Microsoft Windows 7 64-bit) 8.982.3 Rev.A o The supported Allegiant Master Control Software is 2.92.0.
Security Systems Grasbrunn Bosch Video Management System Version 4.5.8 05-February-2015 Introduction Version 4.5.8 is exclusively used for the Caltrans / Walgreens projects and for Divar IP 3000 / 7000. Version 4.5.8 software introduces new features and bug fixes to your Bosch Video Management System. In the following paragraphs, you will find: • New features in version 4.5.8 • Installation Notes • Resolved issues in 4.5.8 • Known issues in 4.5.8 New features in version 4.5.
Security Systems Grasbrunn 05-February-2015 NVIDIA Quadro Professional Driver for Microsoft Windows Vista and Microsoft Windows 7 64-Bit Operating Systems 307.74 Rev.A 30.Jan 2013 o ATI FireGL Unified Graphics Driver (Microsoft Windows Vista 64-bit and Microsoft Windows 7 64-bit) 8.982.3 Rev.A o The supported Allegiant Master Control Software is 2.92.0.1 o Bosch VMS integrates with BIS version 3.0 o Bosch VMS 4.5.
Security Systems Grasbrunn Bosch Video Management System Version 4.5.5 05-February-2015 Introduction Version 4.5.5 software introduces new features and bug-fixes to your Bosch Video Management System. In the following paragraphs, you will find: • New features in version 4.5.5 • Installation Notes • Resolved issues in 4.5.5 • Known issues in 4.5.5 New features in version 4.5.
Security Systems Grasbrunn • • • 05-February-2015 Firmware CPP-ENC 5.52.15 (for VIP X1600 XFM4) Firmware CPP-ENC 5.60.61 (for VJT XF family) Firmware X1/X2: 2.53.05 Combined Firmware 5.80.0625 (CPP3, CPP4, CPP-ENC) VRM: 3.00.48 VSG 5.60.55 BRS: 8.10/8.11 BIS: 3.0 iOS: 6.1.2 Allegiant MCS: 2.92.0.1 Intuikey Keyboard: 1.96 VMWare: 5.1.0 DVR 2.1 / 3.60 o Broadcom NetXtreme Gigabit Driver for Microsoft Windows 7 (64-bit) 14.2.0.5 Rev. A 06.06.
Security Systems Grasbrunn 5.0). 05-February-2015 Configuration • The “Add Encoder” dialog of the VRM shows old and unsupported devices 74282 Operation • Camera of subsystem needs to be dragged & dropped to monitor wall after application is started for logical number to appear properly.
Security Systems Grasbrunn Bosch Video Management System Version 4.5.1 05-February-2015 Introduction Version 4.5.1 software introduces bug-fixes to your Bosch Video Management System. In the following paragraphs, you will find: • Feature enhancements in version 4.5.1 • Installation Notes • Resolved issues in 4.5.1 Feature enhancements in version 4.5.1 "Automatic Device Configuration" is now turned off by default and cannot be turned on anymore. Device Check is still checking the devices periodically.
Security Systems Grasbrunn 05-February-2015 ATI FireGL Unified Graphics Driver (Microsoft Windows Vista 64-bit and Microsoft Win-dows 7 64-bit) 8.982.3 Rev.A o The supported Allegiant Master Control Software is 2.92.0.1 o Bosch VMS integrates with BIS version 3.0 When activating a license on Windows 7 or Windows Server 2008, make sure that the network adapters required for operation are active. When unplugging a network cable, these Operating Systems deactivate the corresponding network adapter.
Security Systems Grasbrunn Bosch Video Management System Version 4.5 05-February-2015 Introduction Version 4.5 software introduces new features and bug-fixes to your Bosch Video Management System. In the following paragraphs, you will find: • New features in version 4.5 • Installation Notes • Resolved issues in 4.5 • Known issues in 4.5 New features in version 4.
Security Systems Grasbrunn • • • 05-February-2015 o The supported Allegiant Master Control Software is 2.92.0.1 o Bosch VMS integrates with BIS version 3.0 When activating a license on Windows 7 or Windows Server 2008, make sure that the network adapters required for operation are active. When unplugging a network cable, these Operating Systems deactivate the corresponding network adapter. When upgrading a Management Server, stop the Central Server service before starting setup.
Security Systems Grasbrunn 05-February-2015 Configuration Client / Management Server • Fixed: Management Server - DiBos communication via Web services did not work under certain circumstance. • Fixed: Old VIP X 10 decoder did not work in Bosch VMS. • Fixed: Configuration of VIP X1600 XF did not work correctly on secondary VRM recording. • Fixed: Settings for I-Frame distance is ignored on the TI-Encoders. • Fixed: Bosch VMS Management Server restart could result in recording gaps.
Security Systems Grasbrunn 05-February-2015 Low bandwidth • Low bandwidth connections: It is recommended not to use forced config changes, if clients are connected via low bandwidth • Configuration/Migration • Record AAC will not work. Encoders will automatically use G.711 to record audio. • When an LDAP-User and a local user have the same name and different passwords and different user groups, Bosch VMS always assigns the user group of the local user.
Security Systems Grasbrunn • • • • • • • 05-February-2015 For creation of custom cameo display layouts BU-ESS needs to be involved . Export video with audio (codec L16) in ASF format sometimes fails PTZ: Junior Dome HD: Focus polarity is permuted (G5 AutoDome, too). Storage state event unfortunately not very precise. Transcoder: Not working with h263 streams. Transcoder: Enable Content Analysis is possible, although not designed to work.
Security Systems Grasbrunn Bosch Video Management System Version 3.0.1 05-February-2015 Introduction Version 3.0.1 software introduces new features and bug-fixes to your Bosch Video Management System. In the following paragraphs, you will find: • New features in version 3.0.1 • Installation Notes • Resolved issues in 3.0.1 New features in version 3.0.
Security Systems Grasbrunn 05-February-2015 Release Notes Bosch Video Management System Version 3.0 Introduction Version 3.0 software introduces new features to your Bosch Video Management System. In the following paragraphs, you will find: • New benefits and features in version 3.0 • Installation Notes • Bugs fixed in Version 3.0 • Known issues in Version 3.0 New benefits and features in version 3.
Security Systems Grasbrunn 05-February-2015 Installation Notes • For system design specifications refer to the Bosch VMS datasheet, Configuration Manual and Quick Installation Guide on http://www.boschsecurity.com. The datasheet is subject to change. Translated versions are not published instantly, for the latest version refer to the English version. • Compatibility o Firmware Version VIP X1/X2 devices require firmware version 2.53.0005 VIPX platform devices require firmware version 4.10.
Security Systems Grasbrunn o o • 05-February-2015 these operating systems will deactivate the corresponding network adapter, which may result in the license to become invalid When replacing an IP device with another, after bringing the device back into the network, it is recommended to activate the configuration again.
Security Systems Grasbrunn • • • • • • • • • • • • • • • • • 05-February-2015 Configuring an I-Frame Quality value of 4 for XFM4 encoder modules was set incorrectly as 0 on the device. This has been corrected. Displaying Image panes in Operator Client for DiBos and BRS has been stabilized. Encoder and decoder connections used to require having the same password on both devices. This has been resolved to work now as well with different passwords.
Security Systems Grasbrunn • • • • • • • • • • • • • 05-February-2015 In some time zones the configured time for cameras recording with VRM is one hour off. Manual Recording in Operator Client for Local Storage and VRM starts recording for the configured post-alarm time, for NVR cameras it starts recording until the manual recording button is pressed again or until the configurable maximum manual recording time has elapsed. NVR Archive Player requires no logon.
