User Manual

9
Option 3
Option 4
Desk Phone with VT EHS Cable:
A VT EHS Cable enables an incoming call
to be answered or ended by the headset
multi-function button.
Contact your local VT dealer to purchase a
VT EHS Cable for your specific desk phone.
1. Connect the VT EHS Cable as shown in
adapter documentation supplied with the
VT EHS Cable. Maybe the telephone cable will also need to be connected for
some phones.
2. Call your connected desk phone using another phone to enable the VT EHS Cable.
Wait 10 seconds before answering the phone.
Desk Phone with lifter: lifter manually lifts
the desk phone handset to make or answer
a call. For mounting Instructions, refer to
documentation supplied with the lifter.
1. Unplug the handset cable from the
desk phone body.
2. Connect the handset cable to the port
marked on the base.
3. Plug the supplied telephone cable into the port marked on the base.
4. Connect the telephone cable into the handset port on the desk phone.
5. Connect the Lifter cable into the port marked AUX
on the base.
Please refer to the
VT EHS Use Guide