User Manual

11
3.4 CONNECT POWER SUPPLY TO BASE
3. RE-PAIRING
Re-pairing: Consistently press the PAGE switch for 5s, the pairing led will flash to search the
headset. Then consistently press the headset mute button, when the headset status LED
flashes, the headset is in the paired status. The pairing will be successful when audio link
indicator and headset status LED power off at the same time.
1. Plug the power adapter into the
port marked on the base.
2. Connect the power adapter to the
mains power socket.
3.5 DOCK THE HEADSET
1. Press the Multiple function button, it will be powered
on after the LED lights for 2S.
Press the Multiple function button again or dock the
headset with the base, then lifting the headset, the
headset with paired light blue Led will lit up when the
headset and base are in the connection.
2. When docked correctly, the headset battery will begin
charging, if needed (LED will flash when charging ).
Charge for 20 minutes or until the battery indicator
on the base is steady green.