User Manual

out of the valves.
7. Holding the bottom of the hopper about 1 1/2 inches from
electric or gas fryer, then operating the equip to release the
doughnut which ready to be fried.
! Keeping Hopper well filled to prevent air from getting into
the valve mechanism.
8. If the donuts fried is not the size you want, adjusting the dial
and repeat step 7.
9. Keep cutter cleaned as soon as possible after use. To better it,
please oil lightly it after use.
II. ADJUST THE DIAL
This donut handheld equip can make 6 kinds of weight of batter
by adjusting its dial. Push the dial down from the knob to
release it from the peg. Then rotate the dial to your desired
weight. After this, release the dial, sliding the peg into the slot.