User Manual

I. ILLUSTRATION&OPERATION
T --- HANDLE
K --- KEY
(FIX THE WEIGHT CHOOSED)
D --- DIAL (6 SIZES)
S --- SPRING
(PRESS DOWN TO ADJUST K)
F --- FIX KEY
A --- ARCH
P --- PLUNGER
H --- HOPPER
B --- BOTTOM
1. Read equip.’s illustration to know more about it.
2. If you want to remove the plunger, see part III.
3. Clean it before use, make sure it can be used freely.
4. Set your desired weight by adjust its dial, see part II.
5. Pre-mix doughnut mix with mixer.
6. Test its shaping condition. Fill hopper with pre-mix doughnut.
Hold this equipment above your container (such as mixing
bowl). Then press handle T to shape & cut doughnut from
the hopper, doing this for several times to eject all of the air