User's Manual

Walabot60ghz Evaluation Kit Hardware spec
Vayyar Confidential
Page 6 of 16
Chapter 1
Introduction
This guide provides information on the installation and operation of the Vayyar vTrig-CTPA0
Evaluation Kit. VTrig_CTPA0 is a three-dimensional mm-wave sensor used as a fixed field disturbance
sensor or short-range device for interactive motion sensing. The device is installed on a wall or ceiling,
and detects objects in a defined arena and displays a real-time image of their positions within the
arena.
Typical applications for the device can be touchless input device (e.g. gesture-recognition interface),
in-room people detection and monitoring for improving comfort and energy-utilization optimization
(e.g. HVAC operation and airflow optimization), detection of abnormal conditions such as fall of elderly
people and apnea in adults and babies, and in-cabin monitoring for detection of infants left in car.
1.1 Release Information
This is a first Hardware version for demonstration of system capabilities. Both algorithmic
capabilities and features are under continuous development and improvement.
This document provides basic description of the system and it is operated. For more details – contact
Vayyar LTD through – www.vayyar.com.
1.2 Glossary
Table 1: Glossary
Term
Definition
AC
Alternating Current
API
Application Programming Interface
DC
Direct Current
DLL
Dynamic Link Library
EVK
Evaluation Kit
GUI
Graphical User Interface
IP
Internet Protocol. An IP address is a numerical identifier assigned to a computing device or
node in a TCP/IP network. The address is used to locate and identify the node in
communications with other nodes on the network.
MCU
Micro-Controller Unit
PCB
Printed Circuit Board
RF
Radio Frequency
SoC
System-on-chip