Sku Number: X0114 X0115 LED UNDERCABINET LIGHT Model Number: U4634 U4632 PACKAGE CONTENTS A B HARDWARE CONTENTS Note: Hardware not shown actual size.
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING • Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). • Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact any surface having a sharp edge.
ASSEMBLY INSTRUCTIONS (continued) 1. Place the mounting clips (BB) 1 apart and mark with a pencil. Marks should be: 9 in. apart for models X0115 ;16 in. apart for models X0114 Mounting clips (BB) should be in line with each other. 4 24W Power Adaptor B BB 2. Secure the mounting clips (BB) 2 to the mounting surface with the dry wall screws (AA) provided. BB AA On / Off Switch Outlet 4.
FUNCTION AND OPERATION(continued) (continued) ASSEMBLY INSTRUCTIONS B. Using linking cord: Fig.7. EE A A Install the additional cabinet light fixture (A) by following steps 1-3 of the instruction steps. Once installed, attach the linking cord (12 inches) (EE) between the cabinet light fixture (previously installed) and the new one. (See Fig.7) Note: 1. This hardware package has a label (DD). Please paste the label (DD) on the cabinet, in order to remind the position of the On/Off switch.