Instructions / Assembly

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

W0425 / W0427

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ

AND SAVE THESE INSTRUCTIONS.

Hardware Package (included):

Mounting Screw (B) Wire Connector (C)

Bolt Nut (D)

Mounting Plate Unit (A)

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.

Page 1 / 2

House Ground Wire

Outlet Box

Mounting Screw (B)

Green Ground Screw

Fixture Mounting Screw

Wire Connector (C)

Mounting Plate Unit (A)

Fixture Wire

Bolt Nut (D)

Glass Shade

Ring

Fixture Ground Wire

Fixture

Backplate

Max.60W Type B Bulb

(not included)

221021

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS W0425 / W0427 WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER WHILE INSTALLING OR SERVICING THIS FIXTURE. NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS. Hardware Package (included): Mounting Plate Unit (A) Mounting Screw (B) Wire Connector (C) Bolt Nut (D) Glass Shade Backplate Max.
PAGE 2
Installation Steps Turn off the power at fuse or circuit box. 1. Unscrew the two bolt nuts (D), remove the mounting plate unit (A) from the backplate. 2. Attach the mounting plate unit (A) to the outlet box by using two mounting screws (B). Adjust the length of the preinstalled fixture mounting screws if necessary. Note: Make sure that two fixture mounting screws are lined up horizontally to make the fixture level. 3. Pull out the source wires from the outlet box.