Installation Guide

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
W0339
1. Thread two fixture mounting screws (B)
through the mounting plate (A),
and then secure with two lock nuts (E).
Adjust the length of the fixture
mounting screws (D) if necessary .
2. Attach the mounting plate (A) to the outlet box by using two mounting screws (B).
3. Pull out the source wires from the outlet box.
Make wire connections using wire connectors (C) as follow:
---Connect the hot wire (black insulation) from the fixture
to the black wire from the power source.
---Connect the neutral wire (white insulation) from the fixture
to the white wire from the power source.
---Attach the fixture ground wire (green insulation or bare wire)
to the mounting plate (A) with the green ground screw, then
connect it to the house ground wire with the wire connector (C).
Carefully put the wires back into the outlet box.
190418
Mounting Screw (B)
Mounting Plate (A)
Green Ground Screw
House Ground Wire
Fixture Ground Wire
Outlet Box
Fixture Ground Screw (D)
Lock Nut (E)
Wire Connector (C)
Fixture Wire
Back Plate
Ball Nut (F)
Support Rod (G)
Glass Shade
Fixture
Bulb Type A Max.100W
(not included)
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Hardware Package (included):
Turn off the power at fuse or circuit box.
Installation Steps
Mounting Plate (A) Fixture Mounting Screw (D)Wire Connector
(C) Lock Nut (E) Ball Nut (F) Support Rod (G)
Mounting Screw (B)