Installation Guide

Spare Parts List:
Glass Shade
(9679CS)
(1 PC)
Ball Nut
(5229BB)
(4 PCS)
141119
Page 2
4. Attach the back plate to the mounting plate: insert the long screws through the two holes, then secure it with two
rubber pads and two ball nuts.
CAUTION: With silicone caulking compound, caulk completely around where the back plate meets with the wall
surface to prevent water from seeping into the outlet box.
5. Attach the glass shade and frame onto the fixture, secure them with ball nuts.
6. Install bulb (not included). See relamping label at socket area or packaging for maximum allowed wattage.
Assembly Kit
(5225MM)
(1 SET)
The following parts are available for re-order if damaged or missing.
Turn on the power at fuse or circuit box.
A: 13-1/2"
B: 17"
C: 16-1/2"
Mounting Plate (A)
Mounting Screw (B)
Green Grounding
Screw (C)
Lock Nut (F)
Wire Nut (E)
Ball Nut (G)
Long Screw(D)