Installation Guide

190611
8. Pull out the source wires and house grounding wire from the outlet box. Make wire connections using the wire
connectors (D):
---The smooth wire (marked) from the fixture to the black wire from the power source.
---The ridged wire (unmarked) from the fixture to the white wire from the power source.
---Attach the fixture grounding wire to the mounting strap with the green grounding screw (C).
Then connect it to the house grounding wire with a wire connector (D).
Carefully put the wires back into the outlet box.
9. Attach the canopy (H) to the mounting strap (A) by inserting the top loop (I), then secure it with the collar (J).
10. Install a bulb (not included). See relamping label at socket area or packaging for maximum allowed wattage.
Mounting Strap (A) Wire Connector (D)
Collar (J)
Washer (G)
Mounting Screw (B) Green Grounding
Screw (C)
Hex Nut (F)Threaded Pipe (E)
Top Loop (I)
Chain (L)
Loop Lock (K)
Canopy (H)
Spare Parts List:
The following parts are available for re-order if damaged or missing.
Mounting Hardware
6130MM (1 SET) for T0520
6131MM (1 SET) for T0525
Turn on the power at fuse or circuit
box.
A
B
A: 8-1/2”
B: 14-3/4”
Glass
10106CS