Installation Guide

ManualsBrandsVaxcel ManualsOutdoor PendantsVaxcel Lighting Southport 9" Wide Outdoor Single Pendant Lantern

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

190611

1. Attach threaded pipe (E) to the mounting strap (A),

then secure it with a washer (G) and hex nut (F).

2. Attach the mounting strap (A) to the outlet box by

using two mounting screws (B).

3. Secure the top loop (I) to threaded pipe (E).

4. Choose the length of the chain (L) you need, then weave

the fixture wire and the fixture grounding wire through

the chain (L), collar (J) and canopy (H).

5. Connect one end of the chain (L) with the loop by using a loop lock (K).

6. Connect the other end of the chain (L) with the top loop (I) by using another loop lock (K).

7. Thread the fixture wire and fixture grounding wire through the top loop (I), threaded pipe (E) and mounting strap (A).

Turn off the power at fuse or circuit

box.

Installation Steps

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

T0520 T0525

Mounting Strap (A)

Wire Connector (D)

Collar (J)

Washer (G)

Mounting Screw (B) Green Grounding

Screw (C)

Hex Nut (F)

Canopy (H) Top Loop (I)

Threaded Pipe (E)

Loop Lock (K)

Chain (L)

Hardware Package(inculded):

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

Fixture

Bulb Type A MAX 60W

(not included)

Outlet Box

Housing Grounding Wire

Wire Connector (D)

Fixture Wire

Fixture Grounding Wire

Mounting Strap (A)

Green Grounding Screw (C)

Mounting Screw (B)

Threaded Pipe (E)

Hex Nut (F)

Washer (G)

Top Loop (I)

Canopy (H)

Loop

Loop Lock (K)

Collar (J)

Chain (L)

Summary of content (2 pages)

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS T0520 T0525 WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
8. Pull out the source wires and house grounding wire from the outlet box. Make wire connections using the wire connectors (D): ---The smooth wire (marked) from the fixture to the black wire from the power source. ---The ridged wire (unmarked) from the fixture to the white wire from the power source. ---Attach the fixture grounding wire to the mounting strap with the green grounding screw (C). Then connect it to the house grounding wire with a wire connector (D).