Installation Guide

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
T0504
WARNING:
TO AVOID RISK OF ELECTRICA
L
SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Hardware Package (included):
181212
Turn off the power at fuse or circuit box.
Installation Steps
Loop Lock (K)
Loop Lock (K)
Outlet Box
House Grounding Wire
Wire Connector (E)
Fixture Wire
Fixture Grounding Wire
Mounting Strap (A)
Green Grounding Screw (C)
Mounting Screw (B)
Threaded Pipe (F)
Canopy (G)
Hex Nut (D)
Washer (J)
Collar (I)
Chain (L)
Loop
Fixture
Top Loop (H)
Mounting Strap (A) Mounting Screw (B) Green Grounding
Screw (C)
Hex Nut (D) Wire Connector (E)
Canopy (G) Top Loop (H) Collar (I)
Threaded Pipe (F)
W
asher (J)
Loop Lock (K)
Chain (L)
1. Attach the threaded pipe (F) to the mounting strap (A),
then secure it with a washer (J) and hex nut (D).
2. Attach the mounting strap (A) to the outlet box by using
two mounting screws (B).
3. Choose the length of the chain (L) you need, then weave
the fixture wire and the fixture grounding wire through
the chain (L), collar (I) and canopy (G).
4. Connect one end of the chain (L) with the loop by using a
loop lock (K).
5. Thread the fixture wire and fixture grounding wire through
the top loop (H), threaded pipe (F) and mounting strap (A).
Bulb Type A Max.60W
(not included)