Installation Sheet

B
A
181121
The following parts are available for re-order if damaged or missing.
A: 11-1/2"
B: 9-3/4"
Turn on the power at fuse or circuit box
Mounting Strap (A)
Mounting Screw (B)
Green Grounding
Screw (C)
Wire Connector (E)
Canopy (I)
Loop Lock (K)
Chain (L)
Hex Nut (D)
Washer (F)
Threaded Pipe(G)
Top Loop (H)
Collar (J)
8. Pull out the source wires from the outlet box. Make wire connections using wire connectors (E) as follows:
---Connect the smooth-coated wire (marked) from the fixture to the black wire from the power source.
---Connect the ribbed-coated wire (unmarked) from the fixture to the white wire from the power source.
---Attach the fixture grounding wire to the mounting strap with the green grounding screw, and then connect it
to the house grounding wire with a wire connector (E).
Carefully put the wires back into the outlet box.
9. Attach the canopy to the mounting strap (A) by inserting the top loop (H), and then secure it with the collar (J).
10. Install a bulb (not included). Check relamping label at socket area or packaging for maximum allowed wattage.
11. Attach the glass onto the fixture, secure it with four replacement ball nuts.
Glass 10037CS
Mounting Hardware
6002MM(1 SET)
Spare Parts List: