Installation Sheet

Top Loop (H)
181121
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
T0452
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
Installation Steps
Turn off the power at fuse or circuit box
Mounting Strap (A)
Mounting Screw (B)
Green Grounding
Screw (C)
Wire Connector (E)
Canopy (I)
Loop Lock (K)
Chain (L)
Hex Nut (D)
Washer (F)
Threaded Pipe(G)
Top Loop (H)
Collar (J)
1. Attach the threaded pipe (G) to the mounting strap (A), and then
secure it with a washer (F) and a hex nut (D).
2. Attach mounting strap (A) to outlet box using two mounting screws (B).
3. Secure the top loop (H) to the threaded pipe (G).
4. Connect the chain (L):
- Determine length of needed chain to achieve desired fixture
height. (To remove excess chain section, use pliers to bend link open)
- Weave the fixture wires and fixture grounding wire through the chain (L),
collar (J) and canopy (I).
5. Connect one end of the chain (L) to the loop using a loop lock (K).
6. Connect the other end of the chain (J) to the top loop (H) using
the other loop lock (K).
7. Thread the fixture wires and fixture grounding wire through the
top loop (H), threaded pipe (G) and mounting strap (A).
Loop Lock (K)
Loop Lock (K)
Loop
Glass Holder
Outlet Box
House Grounding Wire
Wire Connector (E)
Fixture Wire
Fixture Grounding Wire
Mounting Strap (A)
Green Grounding Screw (C)
Mounting Screw (B)
Threaded Pipe (G)
Canopy (I)
Hex Nut (D)
Washer (F)
Collar (J)
Chain (L)
Hardware Package (Included):
Bulb Type A
Max. 60W
(not included)
Glass
Replacement Ball Nut