Installation Guide

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

T0279

Hardware Package (included):

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

Turn off the power at fuse or circuit box

161004

Green Grounding

Screw (E)

Nipple (D)

Mounting Screw (B)

Wire Nut (C)

Installation Steps

Hex Nut (F)

Washer (G)

Mounting Strap (A)

Mounting Screw

Fixture Wire

Back Plate

Nipple

Mounting Strap

Hex Nut

Wire Nut

Washer

Fixture Grounding Wire

Green Grounding Screw

Outlet Box

House Grounding Wire

End Cap

Rubber Pad

Bulb Type A MAX 60W

(not included)

Rubber Pad (L)

End Cap (M)

PAGE 1
T0279 ASSEMBLY AND INSTALLATION INSTRUCTIONS WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
1. Attach the nipple to the mounting strap, then secure it with a washer and hex nut. 2. Attach the mounting strap to the outlet box by using two mounting screws. 3. Pull out the outlet wires and house grounding wire from the outlet box. Make wire connections using the wire nuts: ---The black wire from the fixture to the black wire from the power source. ---The white wire from the fixture to the white wire from the power source.