Installation Guide

140320

A: 8"

B: 20-3/4"

1. Turn off the power at the main fuse or circuit breaker box before starting installation.

2. Unscrew the hex nut and washer to remove the plate from the fixture.

2. Loosen the wire nuts connected with the wires from photocell. (See Fig.1)

Note: Do not move the photocell to prevent water from seeping into the post.

3. Take a white pigtail and black pigtail and make wire connections using wire nuts: (See Fig.2)

a. The black wire from the fixture to one end of the black pigtail.

b. The white wire from the fixture to one end of the white pigtail.

c. The other end of the black pigtail to the black wire from the power source.

d. The other end of the white pigtail to the white wire from the power source.

Put all wires back into the post.

Photocell

White Wires From

Photocell

Wire Nuts

Black Wire From

Fixture

Wires From Fixture

Wires From

Main Power

Wire Nut

White Pigtail

Pigtail

Red Wires From

Photocell

Black Wires From

Photocell

Operation the Unit Without Photocell

Fig.1

Fig.2

White Wire From

Fixture

Hex Nut

Washer

Plate