Installation Guide (P0325)

B
A
191205
The following parts are available for re-order if damaged or missing.
Spare Parts List:
Assembly Kit
6160MM (1 SET)
Glass Shade
X1
10117OB
A: 12-1/2"
B: 6"
9. Pull the cord (a) down slightly until the strain relief (G) touches the hex nut. Attach two fixture mounting screws (E)
to the mounting strap (A), then secure it with two lock nuts (D). Adjust the length of the fixture mounting screws (E)
if necessary, then secure it with two ball nuts (H).
10. Fastening cord by screwing plastic headless screw, using flat head screwdriver (I).
11. Attach the glass shade to fixture, then secure it with the socket ring.
12. Install a bulb (not included). Check relamping label at socket area or packaging for maximum allowed wattage.
Turn on the power at fuse or circuit box.
Mounting Screw (B)
Wire Connector (F)
Strain Relief (G)
Mounting Strap (A)
Fixture Mounting Screw (E)
Green Ground Screw (C)
Lock Nut (D)
Ball Nut (H)
Flat Head Screwdriver (I)