Installation Guide

1. Attach the nipple to the mounting strap, then secure it
with a washer and hex nut.
2. Attach the mounting strap to the outlet box by using
two mounting screws.
3. Secure the top loop to the nipple.
4. Choose the length of the chain you need, then weave
the fixture wire and the fixture grounding wire through
the chain, collar and canopy.
5. Connect one end of the chain with the loop by using
a loop lock.
6. Connect the other end of the chain with the top loop
by using another loop lock.
7. Thread the fixture wire and fixture grounding wire
through the top loop, nipple and mounting strap.
8. Pull out the outlet wires and house grounding wire
from the outlet box. Make wire connections using
the wire nuts:
---The smooth wire (marked) from the fixture to the
black wire from the power source.
---The ridged wire (unmarked) from the fixture to the
white wire from the power source.
---Attach the fixture grounding wire to the mounting
strap with the green grounding screw. Then connect
it to the house grounding wire with a wire nut.
Carefully put the wires back into the outlet box.
9. Attach the canopy to the mounting strap by inserting the
top loop, then secure it with the collar.
10. Install a bulb (not included). See relamping label at socket
area or packaging for maximum allowed wattage.
11. Place the glass shade into the metal cover carefully, then
attach the assembly to the fixture using two bolt nuts.
12. Turn on the power at the main fuse or circuit breaker box.
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
OD21506 / OD21518
100813
Loop Lock
Loop Lock
Fixture
Glass Shade
Metal Cover
Bolt Nut
Loop
Outlet Box
House Grounding Wire
Wire Nut
Fixture Wire
Fixture Grounding W
Mounting Strap
Green Grounding Screw
Mounting Screw
Nipple
Canopy
Top Loop
Hex Nut
Washer
Collar
Chain
Bulb Type A Max.100W
(not included)