Installation Guide

1. Attach the threaded pipe to the mounting strap, then secure it
with a washer and hex nut.
2. Attach the mounting strap to the outlet box by using two
mounting screws.
3. Secure the top loop to the threaded pipe.
4. Adjust the arms of the main fixture according to the drawing
of the package.
Important:
a. The arms should be positioned with equal distances
between them.
b. The arms should be fixed securely.
5. Secure upper arms with bolt nuts.
6. Secure the loop onto the stem of the middle fixture, thread
fixture wires through threaded end of loop first.
7. Connect the chain:
- Determine length of chain needed to achieve desired fixture height.
(To remove excess chain section, use pliers to bend link open.)
- Weave the fixture wires and fixture grounding wire through the chain,
collar and canopy.
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
H0151 / H0152
Finial
Decorative Cup
Threaded Pipe
Hex Nut
Washer
Main Fixture
Middle Fixture
Glass Shade
Socket Ring
Bolt Nut
Stem
Upper Arm
Middle Arm
Inner Arm
Glass Holder
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Hardware Package (included):
141216
Socket
Turn off the power at fuse or circuit box.
Installation Steps
Loop Lock(K)
Loop Lock(K)
Outlet Box
House Grounding Wire
Wire Nut(E)
Fixture Wire
Fixture Grounding Wire
Mounting Strap(A)
Green Grounding Screw(C)
Mounting Screw(B)
Threaded Pipe(F)
Canopy(G)
Hex Nut(D)
Washer(J)
Collar(I)
Chain(L)
Loop
Bulb Type A Max.
100W(not included)
Top Loop(H)
Mounting Strap (A)
Mounting Screw (B)
Green Grounding
Screw (C)
Hex Nut (D)
Wire Nut (E)
Canopy (G)
Top Loop (H)
Collar (I)
Threaded Pipe (F)
Washer (J)
Loop Lock (K)
Chain (L)