Installation Guide

ManualsBrandsVaxcel ManualsChandeliersVaxcel Lighting Trellis 3 Light Single Tier Chandelier - 13.75 Inches Wide

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

H0149

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.

Turn off the power at fuse or circuit box.

141210

Page 1

Mounting Strap (A)

Mounting Screw (B)

Green Grounding

Screw (C)

Hex Nut (D)

Wire Nut (E)

Canopy (G)

Top Loop (H)

Collar (I)

Hardware Package (included):

Assembly Instructions:

Threaded Pipe (F)

Washer (J)

1. Attach the threaded pipe to the mounting strap,

then secure it with a washer and hex nut.

2. Attach the mounting strap to the outlet box by

using two mounting screws.

3. Secure the top loop to the threaded pipe.

4. Connect the chain:

- Determine length of chain needed to

achieve desired fixture height. (To

remove excess chain section, use

pliers to bend link open.)

- Weave the fixture wires through the

chain, collar, and canopy.

5. Connect one end of the chain to the loop using a loop lock.

6. Connect the other end of the chain to the top loop using the other loop lock.

Loop Lock (K)

Chain (L)

Loop

Outlet Box

House Grounding Wire

Wire Nut (E)

Fixture Wire

Mounting Strap (A)

Green Grounding Screw (C)

Mounting Screw (B)

Threaded Pipe (F)

Canopy (G)

Top Loop (H)

Hex Nut (D)

Washer(J)

Collar (I)

Loop Lock (K)

Chain (L)

Fixture

Bulb Type B Max.60W

(not included)

Candle Tube

Socket

Summary of content (2 pages)

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS H0149 WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER WHILE INSTALLING OR SERVICING THIS FIXTURE. NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
7. Thread the fixture wire and fixture grounding wire through the top loop, threaded pipe and mounting strap. 8. Pull out the source wires from the outlet box. Make wire connections using wire nuts as follows: ---Connect the smooth-coated wire (marked) from the fixture to the black wire from the power source. ---Connect the ribbed-coated wire (unmarked) from the fixture to the white wire from the power source. ---Attach the fixture grounding wire to the mounting strap with the green grounding screw.