Installation Sheet

PAGE: 3 / 4
Gently loosen the metal ring from
the glass shade, then install bulbs
(included). See relamping label at
socket area or packaging for maximum
allowed wattage.
Restore the metal ring back to the
glass shade.
090406
F A N C OF A N C O
The slide switch sets the direction of fan rotation. Select the direction
of fan rotation you need by sliding the switch.
Push the slide switch bottom for " Forward" and top for "Reverse".
CAUTION: If you install a Remote Control or a Wall Control for this
fan, make sure to use the pull chains to select the "high" position
for the fan speed and the "on" position for the fan light.
Fig.18
Turn ON the electric power at the
main fuse or circuit breaker box.
Secure the fan light onto the switch box
using the switch box screws.
Fan Light
Connector
Make wire connections using the
connectors respectivly from the switch
box and fan light.
--- The blue wire from the switch box
to the black wire from fan light.
--- The white wire from the switch box
to the white wire from fan light.
Carefully put the wires into the switch box.
Fig.14
Glass Shade
Switch Box Screw
Metal Ring
Bulb MR16 Max.50W
(included)
Fig.15
Fig.16
Fan Speed Pull Chain
Fan Light Switch Pull Chain
Slide Switch
Reverse
Forward
Fig.17